Asked by: Pascasio Passonasked in category: General Last Updated: 24th January, 2020
Why my Whirlpool refrigerator is not making ice?
Considering this, how do you reset a whirlpool ice maker?
Look for the Reset Button Once you do that, you should see the bright red reset button on the bottom of the ice maker itself. To reset the ice maker, push this button in and hold it for 10 seconds. You can release it sooner if: The ice maker starts making noise and operating.
Subsequently, question is, how do you fix a refrigerator ice maker? Ice Maker Does Not Make Ice
- 1 Make sure the bail wire above the ice tray is in the down position.
- 2 Check the water supply line.
- 3 Check the tap valve.
- 4 Check the solenoid.
- 1 Lift the bail wire to shut off the ice maker, and remove the ice bin.
- 2 If the problem persists, consider replacing the ice maker and valve.
Considering this, can water filter cause ice maker not to work?
However, the issue may be connected. In some refrigerator models, the water line that supplies the ice maker and water dispenser connect through the same water filter. If the filter is clogged, water can't get through to create ice.
Why is there no water going into my ice maker?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. This is the water supply line. The valve is usually located under your kitchen sink, or there may be one behind the refrigerator. If there is no moisture on or around the valve, then there are no leaks.