Asked by: Gita Falgueraasked in category: General Last Updated: 15th April, 2020
Why is my Kenmore washer not filling with water?
Consequently, what causes a washer to not fill up?
One common reason for the failure of a washer to fill is heavy clogging in the filters. First, unplug the washing machine, then disconnect the hoses from the back of the unit. You'll be able to see the filters on the back of the washer sitting in the water inlet valve.
Additionally, how do you reset a Kenmore washing machine? How to Reset a Kenmore Elite HE Washer
- Press the "Stop" button twice, and then press the "Power" button.
- Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").
- Press the "Start" button to complete the reset process and restart the washing machine.
Moreover, why is my Kenmore washer not filling up?
Kenmore Washer fills slowly or will not fill at all If the water inlet valve is defective, the wash may fill slowly or not fill at all. If the water pressure is adequate, try cleaning the screens inside the water inlet valve hose connection ports. If the washer still fills slowly, replace the water inlet valve.
What does it mean when your washer fills up with water?
The Water Inlet Valve on your washing machine is used to fill the tub with cold, warm or hot water for the wash and rinse cycles. If the washer continues to fill, then the water inlet valve is defective. If the washer stops filling, then the problem is related to the electrical circuit that controls the valve.