##### Asked by: Adelo Nespereira

asked in category: General Last Updated: 6th February, 2020# What size is a standard wheelbarrow?

**Standard Size**

**Wheelbarrows**are available in a variety of volumes, typically from 2 cubic feet on up to much larger

**sizes**such as 6 cubic feet for a contractor-grade

**wheelbarrow**. A

**typical**garden variety

**wheelbarrow**with a deep basin holds approximately 3 cubic feet; the shallower ones typically hold 2 cubic feet.

Also know, what size is a standard wheelbarrow wheel?

Not for highway use. Comes with a 3" centered hub and 5/8" ball bearings installed and an adapter kit to fit hub lengths up to 6" and 3/4" axle.

Product information.

Product Dimensions | 19 x 16 x 15 inches |
---|---|

Shipping Weight | 5.5 pounds (View shipping rates and policies) |

Department | Bedroom |

Secondly, how many cubic yards is a standard wheelbarrow? Depending upon your wheelbarrow size (i.e. **2** or **3 cubic feet** per wheelbarrow load), it will take 9 to 14 full loads to equal **1 cubic yard**. The chart below shows how many full wheelbarrow loads it takes to equal the specified number of cubic yards. A **2 cubic** foot wheelbarrow typically has a shallow basin.

Subsequently, one may also ask, what is the width of a standard wheelbarrow?

Size. This large contractor's **wheelbarrow** boasts a 6 cubic foot capacity, seamless tray. The single tire measures 16 inches and is tubed for extra durability. It measures 58.75 inches in length, 25.5 inches in **width**, and is 27 inches high.

What is the weight of one wheelbarrow of sand?

A standard construction wheel barrow holds 6 cubic feet, full. If you use that measure, you can multiply the total cubic feet times the **weight** of each cubic foot of **sand**, a little less than 50 kg, and come up with about 290 kg.