Asked by: Sadaf Monica
asked in category: General Last Updated: 28th January, 2020

How does Aladdin EasyFit isolator work?

The Aladdin EasyFit Isolator enables an isolation valve to be inserted quickly and safely in a pipe that can have cold or hot water flowing through it under high pressure. The EasyFit Isolator saves time cooling, draining down, refilling and returning to de-aerate. The bigger the system, the bigger the saving.

Click to see full answer.


Considering this, what does an isolation valve do?

Isolation valve. An isolation valve is a valve in a fluid handling system that stops the flow of process media to a given location, usually for maintenance or safety purposes. They can also be used to provide flow logic (selecting one flow path versus another), and to connect external equipment to a system.

Subsequently, question is, can you move your stop tap? How to Move a Mains Stop-Cock. The first thing to do before attempting to move a stopcock is to make sure you have turned off the mains in the road. If no more water comes through then you can be sure that the main street stopcock works. On the stopcock pipework indoors, there should be a drain plug.

Additionally, how do you permanently cap off water pipes?

The solution is to create enough empty space in the pipe where you need it most, in the immediate vicinity of the end cap.

  1. Turn off the water supply.
  2. Cut the copper pipe with a pipe cutter at the chosen location.
  3. Insert 24 inches of a piece of thin vinyl or rubber tubing into the open end of the copper pipe.

How do you tap into the main water line?

how to Tap Into The Main Water Supply Line

  1. Shut off your water supply at the meter.
  2. Dig to expose the service line.
  3. Tie into the service line, between.
  4. Remove a section of pipe, leaving a gap.
  5. Slip the tee over each end of the pipe.
  6. Tighten the compression nuts.
  7. Install a short nipple, using PTFE tape on all threaded connections to the tee.

37 Related Question Answers Found

How do you know if a pipe is live?

Where should I put my isolation valves?

How do you know if a valve is open or closed?


What is the difference between an isolating valve and a service valve?

What is the best type of valve to use for isolation?

How many types of valves are there?


What does an isolation valve look like?