Asked by: Bhagwan Bernbaum
asked in category: General Last Updated: 5th June, 2020

How do you use the hose on a Dirt Devil Featherlite?


Click to see full answer.

In this manner, how do you use a Dirt Devil Featherlite?

Instructions for a Dirt Devil Featherlite Carpet Shampooer

  1. Press the cleaning solution tank lever while tilting the tank forward and pulling it off of the shampooer base.
  2. Remove the measuring cap from the shampooer's tank.
  3. Fill the cap with carpet shampoo and pour it into the tank.
  4. Repeat Step 3.
  5. Fill the tank with hot tap water to the line marked "Fill."

Similarly, can you wash Dirt Devil filters? Yes, they're bagless and lightweight and they attack dirt like, well, the devil himself. The suction power of Dirt Devils is so great that it makes it easy to tell when the filter needs to be cleaned. In other words, a loss in suction power means that it's probably time to clean and wash the filter.

Similarly, you may ask, how do you take the hose off a Dirt Devil?

How to Remove the Hose From a Dirt Devil Featherlite

  1. Push back on the dirt window flap located where the hose attaches to the vacuum at the bottom.
  2. Push in on the cuff of the lower hose and twist it counterclockwise to unlock the hose.
  3. Pull the long, middle part of the hose out of the two clips on the side of the vacuum cleaner.

Why does my Dirt Devil have no suction?

Dirt Devil Vacuum cleaner won't pick up, no suction If the filter is clogged, the vacuum cleaner will not have proper suction. If your vacuum filter is clogged, refer to your owner's manual for cleaning instructions. The exhaust filter traps particles as the air travels through the vacuum cleaner.

24 Related Question Answers Found

Where is the reset button on a Dirt Devil vacuum?

How do you use a Dirt Devil Spot Scrubber?