Asked by: Antone Best
asked in category: General Last Updated: 5th May, 2020

How do you fix the brakes on a golf cart?

Golf cart brakes can be repaired by following these steps.
Position a floor jack in the center of the rear side of your cart. Lift the rear set of wheels using the jack. Use a socket wrench to disengage the wheels and place them aside. Use a pair of needle-nose pliers to take off the cotter pin that holds the hub.

Click to see full answer.

Moreover, do golf carts have brakes?

Many modern golf carts have self-adjustment brakes and do not require manual adjustment, but they do need a little bit of tweaking here and there. Older golf carts have an adjustment screw on the backside of the brake drum, which can be turned to adjust the brakes.

Also Know, how do you check a solenoid on a golf cart? Set your voltmeter to the ohms reading, and connect its probe to each one of the big terminals. Of course, the reading should be zero. Next, move the cart's switch to forward, turn it on, and accelerate slowly. Your solenoid should click.

Also Know, how do you measure a free brake pedal?

Also be sure to check brake pedal free-play after replacement or adjustment to any brake switch. Brake Pedal Reserve is a measurement from the floorboard of the vehicle to the TOP of the brake pedal when the brakes are applied. Check the brake pedal reserve distance with the engine running.

How do you remove the parking brake on a golf cart?

Place foot on brake, insert key into ignition and turn key to start. Press upper section (where applicable) of brake to apply the parking brake. Press lower section (where applicable) of brake to release parking brake. Drive a short distance and make a controlled stop to ensure proper brake operation.

16 Related Question Answers Found

How do you operate a golf cart?

How do you clean golf cart brakes?

How do you stop a golf cart?

How do I fix my EZ Go golf cart?

What year is my ezgo golf cart?