Asked by: Verisima Iñiguezasked in category: General Last Updated: 25th May, 2020
How do you fit a towel radiator Kudox?
- Check that the wall is strong enough to hold the weight of the towel rail.
- Screw the Bracket Bases to the wall using the Washers & Wall Screws provided or alternative fixings.
- Loosely fit the Bracket Stems to the towel rail with the Bracket Fronts & Bracket Screws.
In this manner, how do you fill a towel radiator?
Turn the towel radiator upside down. Insert the element on to the required side and blanking plug on to the opposite side. PTFE tape can be used on the thermostatic element facing direction if needed. Turn the towel radiator back to upright position carefully without damaging element.
Also Know, how much does it cost to fit a towel radiator? Costs will vary depending on cable runs, and accessibility, so be sure to have the electricians quoting against the same specification. You can expect to pay around £420 for a day's work to include the following: Labour at the day rate of £200. Standard electric towel rail at £160.
Simply so, can you replace a radiator with a heated towel rail?
it's possible, if you want a cold bathroom. towel rails have only a fraction the heat output of radiators, which drops to about nothing when they are thoroughly insulated in a layer of towels to stop the heat getting out.
Is a towel rail as good as a radiator?
Not only are towel rails a more practical solution than standard radiators, as they'll keep your towels warm fluffy and dry, but they also make a stylish addition to any bathroom. A larger bathroom, however, may require another source of heating to sufficiently warm the room.