How do you change the wiper blades on a Honda Fit?

Click to see full answer.

In this manner, how do you change the rear wiper on a Honda Fit?

1. Release the old blade. Lift the wiper arm off the window.
2. Remove the wiper. The blade will release from the wiper arm.
3. Position the new blade. Place the small bar attachment on the new wiper blade into the hook on the wiper arm.
4. Lock the blade into place. Rotate the blade away from you and it will snap into place.
5. Done!

Also Know, can you use different size wiper blades? Wiper blades are vehicle specific. The passenger and driver's side wiper blades are the same size on some vehicles, while on others they are vastly different. If the blades are too long, they can also hit each other, tangle up, and possibly damage the wiper blades, arms, and even the wiper motor and transmission.

Then, how do you change the wiper blades on a 2015 Honda Fit?

Start on the driver's side of your Fit. Most blades are held in place with a tiny clip. Push that clip up towards the arm and push the blade backwards, as if you were sliding it down the wiper arm.

Is it hard to change wiper blades?

Wiper blades are made of rubber, so they naturally wear out after several months of wiping snow, rain and dust from your windshield. You could take your car to the mechanic to have them changed, but it's just as easy to change them yourself. The fitting process is identical for the vast majority of cars on the road.