Asked by: Anel Escaladaasked in category: General Last Updated: 2nd January, 2020
How do I use the self clean on my Hamilton Beach durathon iron?
Keeping this in consideration, how do I clean my Hamilton Beach iron?
With iron in upright position, clean the nonstick surface with a warm, sudsy cloth or sponge; wipe dry. DO NOT USE any abrasive cleaners or metal scouring pads as they may damage the nonstick surface. To clean starch build-up and other residue from the Smooth Glide aluminum soleplate, unplug iron and allow it to cool.
Beside above, how do I clean the gunk off my iron? Mix some baking soda with a little water to create a paste, and rub the paste across the iron. You can use a soft brush to scrub the soleplate and dissolve any gunk. Wipe the iron clean with water. You'll probably need to clean out the steam holes with a damp cotton swab.
Then, how do I use the self clean on my Black and Decker iron?
Press the self clean button and hold it down. Gently move the iron to and fro, over the basin or bowl. Water and steam will wash scale and dust through the sole plate, and into the sink. When the reservoir is empty, release the self clean button.
How do I clean the inside of my iron?
Pour out any stagnant water left in the iron. Pour in distilled water until the reservoir is one third full. Tip: For a stronger solution, mix 3/4 cup water and 1/4 cup white vinegar. Turn on the iron to its highest setting and steam-iron a clean cloth for a few minutes, letting clean water flush out any vent deposits.