Asked by: Alise Girlingasked in category: General Last Updated: 25th March, 2020
How do I set up PetSafe wireless containment?
- Choose a location for the transmitter unit.
- Adjust the settings on the PetSafe Wireless transmitter.
- Check the collar.
- Verify your containment area.
- Make any necessary adjustments.
- Install the training flags.
Herein, how does a wireless pet containment system work?
A wireless dog containment system has two parts: the transmitter and the receiver. The transmitter plugs into an electrical outlet, and the wireless dog collar has the receiver. The transmitter sends out a radius of radio frequencies, and you can adjust the signal distance to your desired boundary space.
One may also ask, do wireless dog fences really work? Many people think an invisible underground wireless electric fence is the best way to keep their dog in their yard. However, they are simply not as effective as you might think. Statistics suggest that invisible wireless electric fences are only about 70% effective.
Also know, how do I reset my PetSafe transmitter?
Remove the receiver collar from your pet. Remove the battery from the receiver collar. Discharge all power by holding the correction level button down until the LED is no longer illuminated. At the transmitter, move the boundary switch from the low to the high position.
How deep do you bury PetSafe wire?
A. We do not recommend burying the dog fence wire any deeper than 2 ft. Burying to such a level should only be done if you have a large enough property that you can adjust your dog fence transmitter to compensate for the depth.