Asked by: Guanmin Iramendiasked in category: General Last Updated: 9th March, 2020
Can you use a Polaris 360 with a booster pump?
Also, do you need a booster pump for Polaris?
Polaris Pressure-Side Pool Cleaners for Inground Pools. They work in any type of inground pool. They're also powered by your return jets, but some require a booster pump to provide optimum water pressure.
Additionally, how long should you run your Polaris pool cleaner? run the 280 for as long as it keeps the pool clean, this could be 1 hour per day to 6 hours per day depending on the amount of debris is in the pool, but remember the 280 has gears and cogs so the more you run it the quicker it will wear out. On average it should take about 3 hours to clean a standard size pool.
Also Know, how does a Polaris booster pump work?
You may have an automatic pool cleaner that uses a booster pump to power the cleaner, the most common brand is Polaris. The pump draws water from the pool circulation plumbing and pushes it back to the pool via the dedicated cleaner line to which the automatic cleaner is connected.
How does the Polaris 360 work?
The Polaris comes equipped with an automatic pressure relief valve in the quick disconnect. If the Polaris is receiving too much water pressure, it will release water at the quick disconnect. Approximately every 3-1/2 minutes the Polaris 360 will go into back-up mode.