Asked by: Quentin Tahlheimer
asked in category: General Last Updated: 11th April, 2020

Can kilz original be sprayed?

Kilz Primer can be used on several types of surfaces: wood; plaster; brick; drywall; paneling; masonry and painted metal. Kilz Primer is a heavy-duty primer that can be brushed, rolled or sprayed on a surface, however, due to its viscosity the product must be thinned down for use in a paint sprayer.

Click to see full answer.


People also ask, how do you use original kilz spray?

Shake can vigorously for 1 minute after mixing ball begins to rattle and often during use. Hold can upright, moving from side-to-side while spraying lightly and evenly about 12" from area being painted. 2-3 thin coats produce best results. Topcoat with latex or oil-based paint after 60 minutes.

Additionally, can primer be sprayed? Like paints, primers can be too thick to spray, and you might have to thin them slightly to get good results. Some primers are formulated for spray application and don't need to be thinned at all; others lose their effectiveness when thinned.

Also question is, how do you clean original kilz?

Once the Kilz dries, apply mineral spirits directly to the covered area. Rub the spirits into the area until the paint comes off. Once the paint is gone, wash the area thoroughly with soap and water. Both Kilz and mineral spirits irritate the skin over time if it's not rinsed well.

What is kilz spray used for?

KILZ ORIGINAL Aerosol blocks most stains including water, smoke, tannin, ink, pencil, felt marker, grease and seals pet, smoke and food odors. Use on interior surfaces including drywall, plaster, paneling, wallpaper, wood, masonry, brick, painted metal and properly prepared glossy surfaces.

37 Related Question Answers Found

Does kilz spray kill mold?

Do you have to stir kilz?

How long does kilz spray take to dry?


What does kilz kill?

What color is kilz original primer?

Is Kilz primer toxic?


What do you thin kilz with?

How long does it take for kilz smell to go away?


Is kilz flammable when dry?

How do you remove kilz from wood?

Can you spray oil based Kilz?